How to apply Raptor Liner on a Jeep.
19:53
315,635
Reddit
How to apply Raptor Liner to 1989 Jeep Cherokee, How to Step by Step instruction. Great for a DIY!!! Project RockLander!!!!

نظر
  • Spencer Chronicles
    Spencer Chronicles

    How many bottles did you use to do the whole vehicle?

    • 5150 MotorSports
      5150 MotorSports

      We used 7 bottles total... Thanks for watching.

  • czthor
    czthor

    So you dont have to buy there color you can use any color paint to tint the coat?

    • 5150 MotorSports
      5150 MotorSports

      Yes, you buy there tintable kit, meaning you add your color.

  • Howard Torres
    Howard Torres

    Amazing job!! if u don’t mind telling, which air compressor u used to get the job done?

    • 5150 MotorSports
      5150 MotorSports

      We have a Ingersoll Rand, 60 gallon... You don’t need one this big. ThNks for watching .

  • Frank Mancuso
    Frank Mancuso

    Hi hey got my bronco 2 painted but need to touch up can you just shoot over the dried raptor or what cant find anything on the recoat, thanks in advance frank

    • 5150 MotorSports
      5150 MotorSports

      I’m not 100% sure, my guess would be to sand and scotch bright the area needed repairing and then Reapply raptor liner.

  • Josiah Burns
    Josiah Burns

    Question: Could you not mix up one larger batch to just refill in between? Unless I missed that, seems like I would have the potential of getting two different shades. About to do this to my truck and wondering.

  • K G
    K G

    Love the jeep and color. I just Raptor lined the interior of my 98 TJ. Had trouble finding tint. Curious as to the type of paint you used...just water based valspar?

    • 5150 MotorSports
      5150 MotorSports

      Thanks for watching, we used Valspar Basecoat LBVR100 series and had the automotive paint store not add any binders when they mix the paint.

  • Parachoques y Mecánica Farmor
    Parachoques y Mecánica Farmor

    I recommend you paint the front grill raptor black, to this date is the gloss glossy or dull? does the dirty stick a lot?

  • Parachoques y Mecánica Farmor
    Parachoques y Mecánica Farmor

    What would happen if it had rained that day, if it got wet the work would be damaged?

    • Monstertruck
      Monstertruck

      Yes. Any water during the painting process will damage the paintjob. The paint dries in a few hours. It takes 7 days for it to fully harden.

  • Parachoques y Mecánica Farmor
    Parachoques y Mecánica Farmor

    ready suscrito. like i love your channel

    • 5150 MotorSports
      5150 MotorSports

      Parachoques y Mecánica Farmor Thank You!!

  • Parachoques y Mecánica Farmor
    Parachoques y Mecánica Farmor

    what color do you use? Doesn't the color come ready? If I want the dark gray color, will it come from the factory? The compressor used is of how many horses and the air reserve tank is required of how many liters? And finally, how many PSI should be worked to paint with the gun sent by the raptor company?

    • 5150 MotorSports
      5150 MotorSports

      Parachoques y Mecánica Farmor it’s a stock Jeep color called Colorado Red. I Used the tintabe Raptor meaning you mix it with what color you want, I believe they do offer, black, white and grey. I used 7 Liters of raptor liner and sprayed between 60 and 70 psi.

  • Parachoques y Mecánica Farmor
    Parachoques y Mecánica Farmor

    How many bottles are enough to paint a Chevrolet Silverado double cab pickup? dark gray,

    • 5150 MotorSports
      5150 MotorSports

      Parachoques y Mecánica Farmor We used 7, on the Jeep Cherokee, I would guess around 10. Thanks for watching.

  • Hongmihn Hahn
    Hongmihn Hahn

    What color were you using?

    • 5150 MotorSports
      5150 MotorSports

      It the stock jeep color for that Jeep, it's called Colorado Red, Thanks for watching.

  • Frank Mancuso
    Frank Mancuso

    How often should you clean the gun , seems people have a lot of problems with this and whats the right thinner to use , I`ve seen conflicting reports on what thinner to use , and as before Thank you in advance.! Frank

    • 5150 MotorSports
      5150 MotorSports

      Frank Mancuso I use lacquer thinner to clean the gun when I’m done spaying the vehicle.

  • Frank Mancuso
    Frank Mancuso

    Hi and thanks for the reply , I actually did find it on amazon and bought it as well , Thank you!

  • Frank Mancuso
    Frank Mancuso

    I bought the 2 gallon kit , where do you get that adjustable tip? does that come with the kit,if not where can I buy 1 , Thank you in advance Frank

    • 5150 MotorSports
      5150 MotorSports

      Hi Frank, I brought the U-POL adjustable gun (UPL-UP4880) as it didn't come with this gun. Thanks for watching. Here is a link to Amazon. amzn.to/30aEM8p

  • Stefan2651M
    Stefan2651M

    Hello, how bottles raptor you are spend on these jeep? Thank you...

    • 5150 MotorSports
      5150 MotorSports

      We used total of 7 liters of Raptor Liner... Thanks for watching...

  • Angel garcias
    Angel garcias

    Where can got paint can I do my car under want do it like black good jod bro nice

    • 5150 MotorSports
      5150 MotorSports

      Angel garcias Thanks..👍

  • Frederick Taylor
    Frederick Taylor

    How’s it holding up? Thinking about doing a two-tone Jeep in the next year

    • Connor Castleman
      Connor Castleman

      Had raptor liner on my tj for many years only problem spots are the hinges, ended up taking them off and painting satin black. Other that that no issue

    • 5150 MotorSports
      5150 MotorSports

      Holds up great, very durable. Thanks for watching.

  • Tony Bucca
    Tony Bucca

    air NIPPLER????

  • Javier Munoz
    Javier Munoz

    Hi Guys great job ...would you guys raptor line my truck ?

    • 5150 MotorSports
      5150 MotorSports

      Thank You for watching, save yourself some money and do it yourself. It is way easier then traditional automotive painting.👍

  • mndz_mkl
    mndz_mkl

    Thanks for the video, it turned out great. My XJ's paint is pretty faded and developing a ton of paint chips, so it's time to repaint it. I was gonna go a cheap paint job from Maaco, but this is much more affordable, and I'll end up getting results I'll be happy with.

    • 5150 MotorSports
      5150 MotorSports

      Raptor Liner is a great option and great for DIY easy prep. Looks great. Thanks for watching. Next month we’re going to be doing a CJ7 in Hugger Orange.

  • OVRLND_E
    OVRLND_E

    That Red looks amazing!! 👌 I just did a video comparing Raptor Bed Liner to Hurculiner and Dupli Color. Raptor definitely beats the other two if your interested in seeing how it compares to the other two check out my channel ✌

  • 13BRAVO REDLEG
    13BRAVO REDLEG

    That sure is a pretty red station wagon...

  • saturnfire74
    saturnfire74

    What was the Valspar Tint that you used?

  • chris pires
    chris pires

    Xj came out nice. This must have been the tintable stuff they sale. 💪🏼 I miss my 96xj ! Never had to put it in 4wheel..EVER!

  • 311mdub
    311mdub

    Is there a guide or manual as to how to tint or color the liner?

    • 5150 MotorSports
      5150 MotorSports

      Yes, on Raptor Liners web site. It very easy to work with... Thanks for watching.

  • Alexander Aguila
    Alexander Aguila

    I love that Colorado red 🎈 , where I can buy it from ?

    • 5150 MotorSports
      5150 MotorSports

      Thanks for watching, any automotive paint store. Colorado Red is a stock factory color.

  • Jared Alexander
    Jared Alexander

    Your a pro with that sheet metal cutter good job man

  • M B
    M B

    Hey guys beautiful job, ii'm from Italy my nane is Mike, i have i questione forma you, my track is a Mitsubishi l 200 pick-up i wanted to knowhow manyliters do needto paint my pick up? Thanks forma che advice andò Hood job

    • 5150 MotorSports
      5150 MotorSports

      Hello Mike, Thank you for watching, we used 7 liters.

  • Jackie Carpenter
    Jackie Carpenter

    What size compressor could one get away with?

    • Jackie Carpenter
      Jackie Carpenter

      @5150 MotorSports I was thinking maybe 10 to 20 gallon

    • 5150 MotorSports
      5150 MotorSports

      Hello Jackie, Thank You for watching. I’m not sure, we have a good size compressor 5hp/60 gallon which I’m sure it way over kill.

  • NSG BarreBaby
    NSG BarreBaby

    How many liters did this take you? And how many coats were you satisfied with? Maybe you said in the video but I didn’t catch it. Also what kind of paint did you mix in to get your color? Great job btw.

  • Iñigo Zapata
    Iñigo Zapata

    Fortunately the second pass was done with way more consistent strokes. It ended up well :D

    • Iñigo Zapata
      Iñigo Zapata

      @5150 MotorSports I'm going to Raptor my XJ before the end of the month, so all these videos are very helpful. Thanks!

    • 5150 MotorSports
      5150 MotorSports

      Iñigo Zapata Thanks for watching, it did come out great, our fiat pass was a sucky for a tack coat. We’re getting ready to do another Jeep CJ towards the end of summer.

  • Hector Silva
    Hector Silva

    Great job guys. Love the scenery beautiful mountains

  • Yoshi Esquire
    Yoshi Esquire

    How long did you wait before pulling the masking tape? great job by the way 👍

    • 5150 MotorSports
      5150 MotorSports

      Thanks for watching, about an hour...

  • Jesus Martinez
    Jesus Martinez

    Hows it holding up? Would i be able to add a gloss to keep it shiny?

    • 5150 MotorSports
      5150 MotorSports

      So far great... I’m not sure about adding gloss, maybe someone can chime in... Thanks for Watching...

  • Colby S
    Colby S

    Do you have to clean the gun between each bottle?

    • Colby S
      Colby S

      5150 MotorSports thank you

    • 5150 MotorSports
      5150 MotorSports

      No, just when your done with the paint job. Thanks for watching...

  • rickstir71 rickstir71
    rickstir71 rickstir71

    No offense but this is the epitome of "polishing a turd" looks good though! Great job 👍🏽👍🏽

    • gagacrazy10
      gagacrazy10

      rickstir71 rickstir71 nah man xj’s are pretty decent actually. Tough as nails and very good off-road 🙂

    • rickstir71 rickstir71
      rickstir71 rickstir71

      @Danny Mitchell why so sensitive? Either we need to change your tampon or menopause has kicked in for you....

    • Danny Mitchell
      Danny Mitchell

      rickstir71 rickstir71 Says the guy with a Teddy Bear for a thumbnail. Cute Bro reeaall cute. It’s not spending 4K on LineX!! It’s spending a couple afternoons and a few hundred dollars. I say Job Well Done!!

    • 5150 MotorSports
      5150 MotorSports

      rickstir71 rickstir71 thanks for watching...

  • That Guy Nico
    That Guy Nico

    I was thinking about doing this to my YJ but I was confused as to how to add my own colors because their website has pre-set colors. Can you specify the kit you used from them?

    • 5150 MotorSports
      5150 MotorSports

      Thanks for watching, you need to get the tintable kit and add the color you want. It’s fairly easy just take your time. www.amazon.com/Raptor-Tintable-Urethane-Spray-Liters/dp/B01CKE7M7M/ref=mp_s_a_1_1_sspa?dchild=1&keywords=raptor+liner&qid=1588574615&sprefix=rapto&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFWN0pDWVFCVVczRjImZW5jcnlwdGVkSWQ9QTA2MTgzMjZFMTFZSVNKRElKMlomZW5jcnlwdGVkQWRJZD1BMDE1OTIwMTJESjlOU0ZOVzlMSlEmd2lkZ2V0TmFtZT1zcF9waG9uZV9zZWFyY2hfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

  • BAJATWIN
    BAJATWIN

    Great video thanks I’ll add alil bit of thinners

  • Иван Потапов
    Иван Потапов

    А проёмы?через зазоры налетит??))

    • 5150 MotorSports
      5150 MotorSports

      Немного!!

  • elcazador 619
    elcazador 619

    Great job guy's! Little bit of overspray in the toyota,blue car,white truck,26ft trailer and don't forget your neighbors roof.👍but I liked the video.

  • DS Rai
    DS Rai

    I wouldn’t spray outdoors, especially in a dusty environment like there, one gust of wind and you’ll have sand stuck all over the car. Suppose it’s not such a concern when spraying bed liner all over. London, uk

    • DS Rai
      DS Rai

      5150 MotorSports Makes sense. Thanks for responding. Stay safe.

    • 5150 MotorSports
      5150 MotorSports

      DS Rai That definitely a concern but when we spray we pick a day that has very little wind..

  • Miles Foster
    Miles Foster

    What color is the paint

    • 5150 MotorSports
      5150 MotorSports

      Miles Foster color is 1989 Jeep Colorado Red.

  • Dale Overton
    Dale Overton

    How many bottles did you use

    • Dale Overton
      Dale Overton

      @5150 MotorSports thank you

    • 5150 MotorSports
      5150 MotorSports

      Dale Overton We used 7 total...

  • Phillip Romero
    Phillip Romero

    How many bottles did it take?

    • 5150 MotorSports
      5150 MotorSports

      We used 7 liters total, please remember to subscribe...

  • Mark Mahecha
    Mark Mahecha

    You should make a video of you guys painting the Toyota pickup

  • Michael Rudisill
    Michael Rudisill

    Also what psi did you decide on going with?

    • Kyle Powell
      Kyle Powell

      @5150 MotorSports what size compressor is recommended

    • 5150 MotorSports
      5150 MotorSports

      We went with 45 psi...

  • Michael Rudisill
    Michael Rudisill

    I know it's hard to see on cameras but did it have any dull spots or tiger stripes?

    • Michael Rudisill
      Michael Rudisill

      Ok cool, thank you for the reply and the info. XJ looks awesome.

    • 5150 MotorSports
      5150 MotorSports

      Not really came out very nice...

  • Foeese Auau
    Foeese Auau

    Your supposed to stay 14 inches away but sometimes you got closer my question is how did the texture turnout?.

    • Foeese Auau
      Foeese Auau

      @5150 MotorSports I see so closer and tip pressure gives less texture I'm thinking doing this.

    • 5150 MotorSports
      5150 MotorSports

      Foeese Auau thanks for watching we wanted less texture, which you can control with your air pressure and an adjustable tip came out great!!

  • Donald Cothern
    Donald Cothern

    Looks good cherry bomb.

    • 5150 MotorSports
      5150 MotorSports

      Donald Cothern Thanks for watching...

  • Mike P
    Mike P

    How much raptor did you use on entire vehicle sir

    • 5150 MotorSports
      5150 MotorSports

      Total of 7 liters...

  • Mike P
    Mike P

    Would live to do my pt cruiser like this

    • Jared Alexander
      Jared Alexander

      @rickstir71 rickstir71 hahha

    • rickstir71 rickstir71
      rickstir71 rickstir71

      I hope you live long enough to do it too 👍🏽

  • T CREED
    T CREED

    Looks gd , I should do tht to my F100 72 ford and don’t have to worry about starch or chips ...👍

  • PB Machines
    PB Machines

    Hey I have a small channel to I did a video on doing a Raptor job on a XJ it’s up to like 52,000 views people really dig it right

  • Travelacho
    Travelacho

    Very cool video, thankyou

  • Robert King
    Robert King

    why didnt you keep back some of your thinners to wash the measuring cup out then add that to your pot

    • 5150 MotorSports
      5150 MotorSports

      Robert King Raptor Liner does not use thinner, just hardener. Used lacquer thinner for clean-up..

  • Stupid Honky Face
    Stupid Honky Face

    I downed a few and smoked a fatty while putting this stuff on. Just do the prep right and it’s hard to screw up

  • John Jude
    John Jude

    Surprise you spay bottom areas first,is that recommend? Hopefully do my Ranger bed and bumpers Thanks

    • 5150 MotorSports
      5150 MotorSports

      John Jude, just how we decided to start... good luck on your Ranger..

  • swav100
    swav100

    Where did u get that spray gun

    • 5150 MotorSports
      5150 MotorSports

      swav100 we got the Raptor Liner Adjustable... www.amazon.com/U-Pol-Products-Raptor-Adjustable-UPL-UP4880/dp/B073V7N7JF/ref=mp_s_a_1_3?keywords=raptor+liner+gun&qid=1582271635&sr=8-3 Thanks

  • scotchtom121
    scotchtom121

    Have money and tools, but nothing like knowledge.

  • S N.
    S N.

    Looks great guys! My only concern is that the rough surface won't allow any gaskets for the mirrors, door handles, locks and any other surface contact gasket to seal properly allowing water to seep past them. Did you smooth out those surfaces or used some kind of filler to make a smooth surface for the gaskets?

    • 5150 MotorSports
      5150 MotorSports

      Thanks, the Raptor Liner it not super rough, and I don’t see any issues of water sipping. We have pressure wash the Jeep several time and no sippage anywhere. It your concerned you could alway use some type of waterproof caulking under and inside the door handles and Mirrors..👍

  • PULE KING
    PULE KING

    Keep filming this videos i love to vatch respect

    • 5150 MotorSports
      5150 MotorSports

      PULE KING Thanks

  • Jonas Nydahl
    Jonas Nydahl

    That sound is special. Almost put on earplugs when I Raptored the high-top on my Chevy van. Didn't, but almost :)

  • Tylor Gearling
    Tylor Gearling

    did you guys use paint for the tint? great video and amazing view from up there makes me miss living out west.

    • 5150 MotorSports
      5150 MotorSports

      fannin88 yes, we wanted to match the factory jeep red color, as we don’t want to paint the jams and is very very close.

    • fannin88
      fannin88

      @5150 MotorSports in person did it come out the same shade of red as you wanted? I'm getting ready to do the same to a really bright color and don't want to be disappointed 🤷🏽‍♂️

    • 5150 MotorSports
      5150 MotorSports

      Tylor Gearling yes. We use automotive grade paint.... Thanks

  • Piotr Mucha
    Piotr Mucha

    what RAL color?

    • 5150 MotorSports
      5150 MotorSports

      Jeep Colorado Red....

  • Rob Cotterman
    Rob Cotterman

    I seen this style of keep at an off-road jamboree years ago and it's been on my build list ever since. Awesome job. 80lbs psi looked great even on cam.

  • Gabriel Manzo
    Gabriel Manzo

    Great job.....I’m thinking of raptor lining my 93 yj same color red..... how’s it been holding on...any tips or anything you would do differently?

    • Sarkis Tchentchenian
      Sarkis Tchentchenian

      Gabriel Manzo: that’s a great question to ask!

    • 5150 MotorSports
      5150 MotorSports

      Gabriel Manzo Thanks.... So far its been great!!!

  • killerct789
    killerct789

    What are the size of them tires?

    • 5150 MotorSports
      5150 MotorSports

      35x12.50R15 GoodYear MTR

  • Reuben Perez
    Reuben Perez

    What type of paint color did you use acrylic?

    • Reuben Perez
      Reuben Perez

      @5150 MotorSports ok I will do that thanks

    • 5150 MotorSports
      5150 MotorSports

      Reuben Perez Yes... For best results, use solvent based acrylic basecoat toners (ask your paint supplier to leave out the binders)

  • the doberman gang
    the doberman gang

    when painting you need a better mask than what you have on..dont wanna breath that paint.

  • Swed Smokey
    Swed Smokey

    why try to make the car look like a 5 year old paint it ??

  • TheCramunhao666
    TheCramunhao666

    muito bom .

  • talley dawkins
    talley dawkins

    the jeep and the whole back drop look like real life GTA

    • gagacrazy10
      gagacrazy10

      Trevor would be proud of the Jeep 😁🤙🏻

    • Jared Alexander
      Jared Alexander

      Lol wym back drop, an do you mean gta the game?

  • Hog A
    Hog A

    a 6 month update would be great thumbs up

    • 5150 MotorSports
      5150 MotorSports

      Trash barn it very hard not rubbery at all. It washer up good.

    • Trash barn
      Trash barn

      Totally agree! I would like to know how it washes? Like does the dirt stick to it? It's a hard finish right not like the rubbery oned? Thx tons great video

    • 5150 MotorSports
      5150 MotorSports

      Hog A...Hang tight coming soon😃

  • Mason Long
    Mason Long

    What tool was used to trim fenders? Looks like it did a clean job

    • 5150 MotorSports
      5150 MotorSports

      Hi Mason, its called a nippler anf workks great on sheet metal. Harbor Freight has them fairly cheap.

  • Caleb m
    Caleb m

    The old bondo on a piece of cardboard. Haha we've all been there at some point.

  • Harold
    Harold

    When you chose the color did you just get it from any paint store?

    • 5150 MotorSports
      5150 MotorSports

      Harold Went to my local automotive paint store and had them mix a pint stock red paint.

  • Robert Thomas
    Robert Thomas

    i like that rough look and the color also

    • 5150 MotorSports
      5150 MotorSports

      Robert Thomas Thanks, we are real happy how it turned out. Thanks for watching...

  • house machine
    house machine

    When you spray each label do you outline at the door jamb then fill them move to the next one? Theres no build up where you start and stop? Just keep a wet edge yes and 50% overlap?

  • William Galindo
    William Galindo

    Use a black magic marker to circle all areas and dimples before applying bondo. Quick ID and faster application. 👍 Ps. Do the small and easy stuff first then larger and more difficult ones.

  • house machine
    house machine

    Is holding gun on angle better?

    • 5150 MotorSports
      5150 MotorSports

      house machine I don’t believe so, would recommend keeping the gun as parallel as possible to the surface.

  • house machine
    house machine

    Any stripes or zebra effect? Did it dry smooth? Any tips? Want to try this

    • 5150 MotorSports
      5150 MotorSports

      house machine no zebra effect, it came out good. May want to test spay on panels as we did in the video.

  • FivePointBaptist
    FivePointBaptist

    Is that Pinon Hills??

    • 5150 MotorSports
      5150 MotorSports

      fivepointbaptist what a small world..😀Thats pretty cool. Good luck on the Bronco, Raptor Liner is a great product.

    • FivePointBaptist
      FivePointBaptist

      @5150 MotorSports I knew it. I just moved to Idaho from phelan last year. I knew that terrain looked familiar. 😂 I'm actually headed down there this week to pick up my Bronco 2. I plan to Raptor Liner it as well.

    • 5150 MotorSports
      5150 MotorSports

      fivepointbaptist yep...

  • lee santos
    lee santos

    Paint the front bumper black and good to go !

  • Uncle Fjester
    Uncle Fjester

    Every car within 1/4 mile now has a pink overspray to it.

    • Jared Alexander
      Jared Alexander

      One time I put a red shirt into my laundry with my light colors cloths an they tuned pink

    • rickstir71 rickstir71
      rickstir71 rickstir71

      Drama Queen award goes to...

    • MrMrsregor
      MrMrsregor

      no need to worry about anything more than 10-15 feet away. this stuff is so thick and clumpy, not a fine mist

  • Chris Chapman
    Chris Chapman

    How many hours would you say you had tied up in bodywork, masking, paint in all

    • 5150 MotorSports
      5150 MotorSports

      @Chris Chapman We had to replace the passenger fender, trim both front fenders for more clearance for the 35" tires. Hood was fairly wavy which took most of the time. I say around 20 smaller dents and door dings, nothing major. One of the benefits to Raptor Liner it hides lots of the smaller imperfection that world show up in high gloss paint. Thanks for subscribing it's very appreciated. :)

    • Chris Chapman
      Chris Chapman

      Was the body in pretty bad shape? Sorry if I missed this part, I'm new here, but will definitely be subscribing!

    • 5150 MotorSports
      5150 MotorSports

      I say around 30.

  • Adam Deibel
    Adam Deibel

    Don’t you usually paint top down? All the liner products I’ve put down have been slower passes and single passes to get an even texture. But, I’ve never used this product.

    • 5150 MotorSports
      5150 MotorSports

      Not necessarily, some painter prefer starting at the bottom working up, you just need to be aware of your air supply. Also your tack coat starting from the bottom helps the paint from running. The hose getting in the way is always a concern even from starting from the top, once you have one coat you need to be aware of you hose../

  • Rockaway Bully
    Rockaway Bully

    Love that red on there super nice 👍🏼

  • 00ninja00
    00ninja00

    Paint that front tube bumper red liner too. Would be nice!

    • 5150 MotorSports
      5150 MotorSports

      We already painted it hammered black, but that a great idea we may do that!

  • tjdot8
    tjdot8

    Reminded me of a shake weight 8:45 😂

  • King Arthur
    King Arthur

    I want to do this to my XJ too. However I'm concerned I won't know how much I actually need. And how did you determine the job was good?

    • 5150 MotorSports
      5150 MotorSports

      rob nyczaj we used 7 liters...

  • Jeffrey Boarman
    Jeffrey Boarman

    Different Strokes for different folks

  • jerry quintana
    jerry quintana

    Looks great I have thought about doing my entire Fj cruiser. I will be doing my steel winch bumper this summer getting tires of repainting it every couple of years. Did my sons FJ cruiser roof in white this summer came out great. Great product easy to use. You need at minimum a 6 gallon compressor. Does not help with sound deadening I have a buddy that did his entire Fj Cruiser.

  • Roger Richardson
    Roger Richardson

    Painters always start at the highest point work there way down don’t drag the hose on what you painted peel the tape as soon as you spray it it’s dry looks good in red

    • Larry Platt
      Larry Platt

      5150 MotorSports you want I start at the top, otherwise overspray lands on your dry paint

    • Dan Sears
      Dan Sears

      @5150 MotorSports I owned a body shop and have been painting 35 years , I have never started at the bottom always top down.

    • 5150 MotorSports
      5150 MotorSports

      Not necessarily, some painter prefer starting at the bottom working up, you just needd to be aware of your air supply. Also your tack coat starting from the bottom helps the paint from running. The hose getting in the way is always a concern even from starting from the top, once you have one coat you need to be aware of you hose..

  • Roger Richardson
    Roger Richardson

    The roof ????

    • 5150 MotorSports
      5150 MotorSports

      Roger Richardson Roof came out great... Sorry didn’t get video on it...

  • Wendell Weathers
    Wendell Weathers

    I have seen it done more than one time, all of the results have been about the same. There is a way to not have the streaks and modeling. One way is to not be so stingy putting the second coat on. The other way is ditch the gun. Monstaliner is a much better finish .

  • Jim Brown
    Jim Brown

    Where are you located , ? It looks beautiful there

    • 5150 MotorSports
      5150 MotorSports

      Jim Brown locates is Southern California, in the High Desert town called Piñon Hills..

  • Jim Brown
    Jim Brown

    What was the tool you were using to cut the wheel well

    • 5150 MotorSports
      5150 MotorSports

      Jim Brown - it’s called a air nipple, they work really good on sheet metal...

  • Stran I
    Stran I

    Hey Sir - thanks for your upload. Did you use any primers ? Sorry probably i missed that bit . Many thx

    • 5150 MotorSports
      5150 MotorSports

      Stran I... Yes we used red oxide primer.. The primer color is very close to the stock red paint on the Jeep, it’s kinda of hard to see.. Thanks

  • Jamey Mote
    Jamey Mote

    👍 👊 😎

بعد